![]() |
DOE Inaugural National Collegiate Wind CompetitionRFP responses to technical questions posted.The RFP and responses to technical questions (Amendment 1) is available on the Federal Business Opportunities website, solicitation number RFC-3-23003. The deadline is February 19 at 5 pm Mountain Time.On January 8, 2013, the U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory issued a Request for Proposals (RFP) to participate in DOE's inaugural National Collegiate Wind Competition, designed to enable the DOE to help foster the growth of the future wind energy industry and workforce. The Competition is a forum for undergraduate college students of multiple disciplines to investigate innovative wind energy concepts; gain experience designing, building, and testing a wind turbine to perform according to a customized market data-derived business plan; and increase their knowledge of wind industry barriers. The theme of the inaugural competition taking place in May 2014 is to design and construct a lightweight, transportable wind turbine that can be used to power small electronic devices. |
If you have
any questions, concerns, or announcements that you would like to add to this
e-newsletter, please do not hesitate to contact us. For general comments,
contact E. Ian Baring-Gould,
WPA technical director. For Web-related communications, contact Julie Jones. For general
communications, contact Ruth Baranowski. Update your subscriptions, modify your password or e-mail address, or stop subscriptions at any time on your Subscriber Preferences Page. You will need to use your e-mail address to log in. If a colleague forwarded this e-mail to you and you want to subscribe, visit Wind Powering America's subscription page. If you have questions or problems with the subscription service, please contact support@govdelivery.com. This service is provided to you at no charge by DOE's Office of Energy Efficiency & Renewable Energy (EERE). Visit the website at http://www.eere.energy.gov. |
Department of Energy launches Student Design Competition for Wind
New Solar Thermal System for Griz House 8
Bradley Layton, Tim Chester and Adam Coppock pause for a pose after a successful installation of Tim's solar thermal creation. The total cost of materials was under $250. The system's baffles were made from repurposed aluminum cans which were mindfully deposited in the recently deployed recycling bins at Missoula College.
To hear Allison Mills's KBGA radio interview, click here.
IT Student Researcher Recognized
Lance Pellerin graduated this past spring from Missoula College (formerly known as the College of Technology) with his associate degree in computer technology. He left the program with a 4.0 grade-point average and moved to UM’s central campus this fall to pursue a bachelor’s degree in computer science. In April, Pellerin won the physical sciences category at the UM Undergraduate Research Conference. His work has solicited discussion about the impact of information technology in reducing the University’s overall carbon footprint.
The complete article is available at
http://www.umt.edu/urelations/pubs/Vision%20magazine/Vision%202012/Student.php
Tim Chester builds solar thermal system in his garage over the semester break.
With a little help from Martin Wisherd '12
Tim had a working system completed and ready for testing at the end of a weekend of work.
Tim reports:
"Thanks for all the help Martin! I was able to get it finished about 8pm last night.
I have it out in the yard already getting numbers this morning! I set it up on an old tire and leaned against the house so I can adjust angles. I put it out there at 9:30 and the air temp was 21.9F. It is just sucking in ambient air with no fan and is putting out 57.8F from the outlet. I'll take a 35F heating factor, but I think it will do much better with some tweaking. The sun is not being very cooperative right now, it is still a bit hazy and small clouds are messing with me. I'm getting pictures and playing with the angles to try to optimize it. I am getting 5F shifts just by changing the angle a few degrees.
If I had it hooked up to ducts from the house, I would have 65F going in and 100F coming out, which should heat the room nicely. You guys correct me if I'm wrong, but warmer air has more moisture content and should heat better than cold dry air. So I would suspect an even higher heating factor. I think a fan forcing airflow will make a big difference as well. I'll get pictures throughout the day and post them up tonight. Hopefully the sun will cooperate and this haze will go away!"
Tim
CAD Program Director and Colleague Departs
ACE Adjunct Professor Dianne Burke new MTSBA President
“Dianne (Burke) has been a strong leader and advocate for public education as a member of our Board for many years,” said Lance Melton, Executive Director of the Montana School Boards Association. “We look forward to her leadership over the next year as President, where she will be instrumental in advocating for the interests of every Montana child before the Montana legislature with a unified voice. Dianne will also take charge in advocating for Montana’s children at the federal level when the MTSBA Officers meet with our Congressional Delegation in Washington, D.C., in January,” Melton said.
Dianne Burke has served on the Frenchtown School Board since 2004 and has held leadership positions since 2005. She was raised in Houston, Texas, and received a B.A. in Biochemistry from Rice University and a M.S. in Chemistry from University of Houston. She is currently working on a doctorate in Education Leadership at the University of Montana. A Frenchtown resident for over 20 years, Dianne owns a computer consulting business and is a faculty member at the University of Montana. Her 3 children are graduates of Frenchtown schools. In her spare time, Dianne enjoys woodworking, running, and playing the violin.
Health IT - Scribes Recruiters on Campus
Tim Chester featured in the Kaimen
Rescheduled: Bachelor of Applied Science Meeting on 11/20/12
If you are unable join in person and would like to join via Skype or Amvonet, please contact Beth Shirilla at beth.shirilla@umontana.edu. The purpose of the meeting will be to share plans of study, answer questions regarding specific degree requirements, and to investigate additional course offerings specific to energy technology.
Details on the program can be found http://ace.cte.umt.edu/BAS_Overview.pdf
Aluma Alison Sweeney featured in Bozeman Chronicle
Energy Tech Alumnus Presents to Students
Mandatory PETSA Training
Time to Think About Spring Semester!
- Registration for Spring 2013 begins October 22nd
- To register on time, set up your advising appointment now
- ACE Department Students (CAD, Computer Support, IT, Electronics Tech, & Energy Tech) should contact Beth Shirilla to set up an appointment with their advisor
- Bring the following to your appointment:
- Your unofficial transcript
- Your program checklist
- Program flow chart or any other advising materials you may have from previous semesters
2012 Tech Fair
Programs from Missoula College's Applied Computing & Electronics Department were highlighted at The University of Montana Tech Fair. Some of the student projects on display included the Human-Powered Vehicle; winning CAD Technical Drawings from Bike Rack, Recycling Center, & Building Footprint contests; and the Sustainable Computing Research Project (Physical Sciences undergraduate award winning poster).
The Tech Fair showcases campus technologies and support services vital to the success of UM students faculty and staff. Thanks goes out to Professors Layton, Varsa, Shen, and Gallagher; graduate Andrew Machain; Administrative Associate Beth Shirilla; and Energy Technology student Zac Rambo and Nathan Ferro for staffing the event.
Pictured below: Department Chairman Tom Gallagher and Energy Technology Graduate Andrew Machain (left) and the Battery Doctor's portable solar power station prototype (right)
Additional credential for 2-year IT program students
Graduation Application Deadline: October 1
Long-time Faculty Member & Friend Steve Rice Passes
In addition to his successful teaching career, Professor Rice excelled in research. He was a member of the innovative and highly-publicized UM research team which taught bees to detect land mines. Professor Rice was credited as the chief architect for the "Electronic Beehive", a key component in the success of the project. The team was able to transfer the technology from its UM research into the highly successfully private company Bee Alert Technologies.
Steve was a dear friend and colleague.
Energy Technology Program Powers Roots Fest
Autumn 2012 Admissions Deadline
IT Student's Research in Green IT Wins Award
Workforce Report Released - Demand for Electronics Technical Professionals Strong
Autumn Registration Begins - April 9
Advisor Contact Information:
Computer IT Program
Penny Jakes 243.7804 penny.jakes@umontana.edu
Rhonda Tabish 243.7808 rhonda.tabish@umontana.edu
Steve Stiff 243.7913 steven.stiff@umontana.edu
Energy Technology
Brad Layton 243.7865 bradley.layton@umontana.edu
Tom Gallagher 243.7814 thomas.gallagher@umontana.edu
Computer Aided Design
Krisztian Varsa 243.7811 krisztian.varas@umontana.edu
Electronics Technology
Tom Gallagher 243.7814 thomas.gallagher@umontana.edu
Steve Stiff 243.7913 steven.stiff@umontana.edu
Grant Myhre Talks About Shell Eco Marathon on Montana Today
UMCOT Students Prepare for Shell EcoMarathon
![]() |
Welding student Jesse Sedler
clears the frame he welded and helped design for launch
|
NPR: Is U.S. Energy Independence Finally Within Reach?
Read or listen to full story at : http://www.npr.org/2012/03/07/148036966/is-u-s-energy-independence-finally-within-reach
ACE Department Looking for Work Study Student
Electronics Technology Students Tour Research Facility

Highlighted in the tour was the robotics equipment used in the research center. X-ray crystallographers, crystallize proteins and visualize their 3-D structure from diffraction data obtained by exposing these protein crystals to high intensity X-ray beams (Top Figure). The 3-D image of the protein enables understanding of their biological function, and also is used to design new drugs against diseases. The Crystal Gryphon, is a small & fast robot for setting up crystal plates that we use in our lab to crystallize proteins (Bottom Figure). Essentially the robot consists of two arms each capable of x, y and z axis motions. The side arm on the right delivers the protein to the plates and the middle arm dispenses the crystallization solution. The protein arm dips its needle into the protein solution, withdraws the requisite amount, often just a minute drop (in the order of 1/1000 of an ml), and then dispenses them into 96 wells on to the plate below. The second robot that has 96 dispensing needles does the same, but dispensed in one motion. The plates are then set in incubators to obtain protein crystals.


The robotic arm has three degrees of freedoms, horizontal, x,y and vertical z axis, but permits only one motional degree at a time, to ensure precision and accuracy. The arms have sensor that detect liquid levels and also floor levels so that they can draw correct amounts of liquid and not touch the plates. It is equipped with motion sensors that stop the robot if it detects human movement near the needles to ensure no accidents occur. The robot is controlled solely by a computer powered by an i7, 3.4 GHz Strong Arm processor and a 64 bit robotic control software communicates via fiber optics to the robot, ensuring very high operating baud rate. Thus the overall design of the robot accommodates of precise motions with minimal human interference and is rated to perform for at least ten years of continuous use.
Dr. Layton to Give Keynote Presentation at STEM Summit in Bellevue, WA
This two-day Summit will introduce you to K-20 best practices in education focusing on innovative teaching and learning in STEM. Attendees will be examining curriculum for incorporation of best practices in STEM teaching and learning.
Dr. Layon's keynote presentation will focus on Energy Technology Education in Efficiency To Engender Energy Independence:Science & Math Lay the Foundation for the Next Generation of Energy Technology Leaders.
Dr. Layton is an Assistant Professor for the Department of Applied Computing and Electronics at The University of Montana College of Technology.
Dr. Layton received his Ph.D. in Biomedical Engineering from the University of Michigan, Ann Arbor, with concentrations in soft-tissue mechanics and the molecular structure of collagen. His dissertation topic was Remodeling of Heterogeneous Extracellular Matrices of the Diabetic Nerve: Models and Experiments. He received his Masters in Science in mechanical engineering from the University of Michigan, Ann Arbor and his Bachelors in Science in mechanical engineering from the Massachusetts Institute of Technology, Cambridge, MA.
Dr. Layton now serves as the Director of Energy Technology Program at The University of Montana College of Technology. He is currently facilitating the coordination of face-to-face and online learning opportunities and innovations. Dr. Layton also has a research interest in nanoscale biomechanics and has several publications in this field. He has received research funding from The National Science Foundation, NASA, The Keck Foundation, and the United States Department of Agriculture. His current passion is educating his students and the general public about the threats of energy dependence and the opportunities available for adopting sustainable energy technologies.
In his spare time Dr. Layton enjoys bicycling and hiking with his family. As a former member of the United States National Rowing Team, he now very much appreciates the opportunities he has to kayak and actually see where he is going!
For more information on the summit, please see http://www.coeforict.org/events/stemsummit/
REAP Application Process Open
The 2012 Rural Energy for America Program (REAP) has been announced in the Federal Register. Applications are now being accepted for the Renewable Energy Systems, Energy Efficiency Program, Feasibility Study and Energy Audit programs. The 2008 Farm Bill created several energy-related funding programs for USDA Rural Development. The Rural Energy for America Program (REAP) and several other programs are designed to provide access to capital to incentivize the implementation of energy efficiency and renewable energy practices in rural small businesses and agricultural operations.
The MT allocations are less than last year and are as follows:
Small Grants (<$20,000) - $71,000
Large grants (>$20,000) - $72,000
REAP Guarantees - $469,644
Additional funds are available from the National Office reserve on a first come first served basis for the loan guarantee funds and on a competitive basis for the grant funds. In 2011 Montana funded $113, 414 in small grants, $158,298 in large grants, and $153,232 in Loan Guarantees. We hope to do better in 2012.
Application information can be obtained from any Rural Development Area Office or by visiting our website at: http://www.rurdev.usda.gov/MT_reap.html
Energy Technology Students Awarded a KRELF Grant
REVIT Training - January 16
New Interactive Map Launched for the PV industry
The map assists the user in understanding the inter-relatedness of various occupations within the various fields of sustainable energy technology.
Layton Gives talk on Thermoeconomics at ASME International conference in Denver, Monday November 14, 2011
Layton fielding technical questions at the conclusion of his talk, demonstrates some of the strategies he practices to stay physically fit, keep organic material out of landfills, reduce loads on municipal waste management, and enrich the soil in his own backyard. Photo courtesy of Leila Aboharb.
Biomimicry Design Challenge
Over the course of the semester, students enrolled in Technical Drawing and AutoCAD II will generate ideas, draw hand sketches, ,and produce 3D models to prepare for their presentation to the judges at the Biomimicry Institute. This competition is exciting for the College of Technology because the home of the Biomimicry Institute is in Missoula so we consider ourselves the hometown favorite. Recently, Technical Drawing students completed the first round of ideation which resulted in a variety of excellent ideas and designs. The students will pick one design and then hone the project. Cheer us on as we head for the deadline of December 21st!
Janine Benyus describes Biomimicry in the following TED talk:
Energy Technology OSHA Training
And here is the happy group of trainees after a well-delivered ten-hour session!
I.T. Students Tour Local Data Center
Students Compete in Programming Contest
Further information can be found on contest website http://www.cs.montana.edu/paxton/contest/
Changes on the Horizon for Montana Two-year Colleges
Deputy Commissioner John Cech has provided a comprehensive update of the accomplishments of College!NOW since January 1, 2011, and an overview of the five community listening sessions planned for October (Billings, Great Falls, Butte, Helena, and Missoula) focusing on the rebranding and renaming of Montana’s five Colleges of Technology.
Sessions in Missoula will take place on Thursday, Oct 13 from 7:15-8:30am Doubletree-100 Madison-UM Room; 9:00-10:15am-UM Main Campus-32 Campus Dr-University Ctr. Theatre-3rd Floor,5:00–6:15 pm-COT Campus-909 S. Ave. West-HB 11
The first College!NOW newsletter is available at http://www.umt.edu/president/docs/CollegeNOW_enews_FINAL.pdf or on the website: http://mus.edu/2yr/COLLEGEnow/news/CollegeNow_eNews.html
Energy Professor Directs Rowing Instruction
Student Wins Undergraduate Research Award
Energy Interns Complete Solar Installation
MS Network Administrator Academy
Human Powered Vehicle Challenge
Addional Sections: ITS 210 & ITS 280
Missoula 2011 Commuter Challenge

CAD Bike Rack Design Finalists
Autumn Term Registration and Advising
Wednesday, March 23 from 2 – 3 in HB04
Monday, March 28 from 12 – 1 in HB05
Tuesday, March 29 from 12 – 1 in HB04
Online advising forms are available at http://ace.cte.umt.edu/students/advising.html Please come prepared by completing the requirements checklist for your program of study prior to attending advising sessions. You should have a pretty good idea which courses to enroll.
Individualized advising with a faculty member is available by appointment. Please contact Jenny Gorsegner/Miranda Stroud (243.7916) for further details.
Brown Bag Webinar: Spatial Data Sets
UM Biomass Gasifier Generates Electricity
http://missoulian.com/news/local/article_125cccf4-3fd6-11e0-b619-001cc4c03286.html